Tillbaka till bloggen
Gör-det-själv-guider 2026-11-21 Strange Bedfellas Shop 0 visningar

Blep Stickers: Application and Care Guide

Blep Stickers: Application and Care Guide

Learn how to apply and care for your Blep Stickers from Strange Bedfellas. These large vinyl stickers feature Batou, Tyv, and Vetti.

What Are Blep Stickers?

The Blep Stickers set includes three large vinyl stickers featuring Strange Bedfellas characters Batou, Tyv, and Vetti, each peeking out with their tongues out. Each sticker measures about 5 inches wide and is printed on shiny, durable white vinyl with a UV laminate for protection from the elements. The art is by ThatSmollDragon, and the stickers were printed by StickerApp.

Key Details from the Listing

  • Blep Stickers: This set contains 3 large stickers featuring some of our favorite characters: Batou, Tyv, and Vetti. You know exactly which characters you're getting — no mystery here.
    Blep Stickers
    Blep Stickers
  • Blep Stickers: These stickers are about 5 inches wide and made of shiny, durable white vinyl. The size and material help you choose the right surface and placement.
  • Blep Stickers: These stickers were printed on a PVC free vinyl that has a UV laminate for protection from the elements. The UV laminate helps prevent fading from sunlight, making these stickers suitable for outdoor use.

How to Apply Your Blep Stickers

Follow these steps for a smooth, bubble-free application on a clean, dry surface.

  1. Clean the surface: Wipe the area with rubbing alcohol or a mild soap solution to remove dust, grease, and residue. Let it dry completely.
  2. Peel the backing: Carefully peel the sticker from its paper backing. If the sticker is large, use the hinge method: tape one edge of the sticker to the surface, lift the other side, peel the backing, and slowly lay it down.
  3. Position and press: Place the sticker on the surface without pressing down fully. Adjust alignment if needed. Once satisfied, press from the center outward using a squeegee or credit card wrapped in a soft cloth.
  4. Remove air bubbles: If small bubbles remain, gently push them to the nearest edge with your finger or squeegee. For stubborn bubbles, pierce with a pin and smooth out.

Caring for Your Stickers

The UV laminate on these stickers helps protect against sun damage, but you can extend their life by avoiding prolonged exposure to harsh weather. For cleaning, gently wipe the sticker surface with a damp cloth and mild soap. Do not use abrasive cleaners or scrubbers, as they may scratch the vinyl. If applied to a water bottle or laptop, handle with normal care and avoid soaking the sticker.

Relaterade artiklar

Customer Service
Hem
Produkter
Varukorg
Profil